OPTIBELT LASER POINTER
The optibelt LASER POINTER makes it easier to adjust belt drives. The belt pulleys are adjusted to each other via their front or side faces, respectively.
BENEFITS OF THE OPTIBELT LASER POINTER:
- Fast and easy use for belt drives.Laser output power 5 mW.
- Exactly aligned line projection.
- Measuring of parallel and angular misalignment.
- Higher operational reliability of the drives.
- Time-saving and precise measuring method.
SPECIFICATIONS
- laser: class l M: EN 60825-1
- output power: < 5 mW
- wavelength: 635 nm
- measure < 0.5 mrad
- accuracy: parallelism to magnet face
- case: brass, nickeled
- power 1.5 V AA-battery
BELT ALIGNMENT
Put the 3 target magnets on the side of the pulley in the position ≈ 0°, 90° and 270°.
Fix the optibelt LASER POINTER at the side of the other pulley, use magnet plate, if necessary (caution, laserline-difference). Switch on the optibelt LASER POINTER and align it to the target magnets.
At non-magnetic pulley use strong double-sided sticky tape. The alignment of the belt drive (horizontal and vertical) is correct if the laser beam at all 3 target magnets is on the same marking. If necessary, align the belt drive and check it again.